Inicio > Tecnología, ingeniería, agricultura > Tecnología: cuestiones generales > Ingeniería: general > FATIGUE LIFE AND STRESS ANALYSIS OF PORTAL AXLE GEARBOX
FATIGUE LIFE AND STRESS ANALYSIS OF PORTAL AXLE GEARBOX

FATIGUE LIFE AND STRESS ANALYSIS OF PORTAL AXLE GEARBOX

DEVAN P D

58,96 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2023
Materia
Ingeniería: general
ISBN:
9786206144953
58,96 €
IVA incluido
Disponible
Añadir a favoritos
Sobre IBD

Portal axle is a type of gearbox, especially used in off-road vehicles. Excessive contact and bending pressures lead to gear tooth failure. Spur and Helical gear trains without idler have taken for the analysis. Gear trains are modeled in SOLIDWORKS and analyzed in ANSYS workbench software. Gear materials for this study include steel, cast iron, and Aluminium alloy. In this study, contact stresses and bending stresses of spur and helical gear are theoretically calculated using Hertzian theory and Lewi’s formula for all the three materials. The corresponding analysis is carried out using Finite Element Analysis (FEA). The results from theoretical calculation and FEA analysis is compared with each other. It is observed the results from both theoretical calculations and FEA analysis are in good agreement with each other. It is observed that stress induced on the spur gear made up of Aluminium alloy is less in comparison with all the other combinations. Fatigue analysis on spur gear made up of Aluminium alloy is carried out.

Artículos relacionados

  • An Engineer’s Alphabet
    Henry Petroski
    ...
    Disponible

    35,95 €

  • Diseño básico de concreto reforzado
    Jaime Iván Mora Samacá
    El texto tiene dos finalidades, contribuir en el proceso de aprendizaje de los estudiantes de una manera didáctica y sencilla, con conceptos básicos de las estructuras en concreto reforzado, exponiendo un camino a seguir indicado en el Reglamento Colombiano de Construcción Sismo Resistente NSR-10 y enseñar sobre las diferentes formas de diseñar y revisar una viga, utilizando la...
  • Risk and exposure to citric acid
    Daniela Ruiz Escobar
    This research was conducted in a company dedicated to the production and commercialization of food additives, which uses several organic chemicals such as citric acid as raw material in the production of its products. This study focuses on the production line for powdered flavorings, since it was determined that exposure to these products during some stages of the process cause...
    Disponible

    55,22 €

  • Риск и воздействие лимонной кислоты
    Даниэла Руис Эскобар
    Данное исследование проводилось в компании, занимающейся производством и коммерциализацией пищевых добавок и использующей в качестве сырья для производства своей продукции некоторые органические химические вещества, такие как лимонная кислота. Исследование посвящено линии производства порошкообразных ароматизаторов, поскольку было установлено, что воздействие этих продуктов на ...
    Disponible

    26,54 €

  • Risque et exposition à l’acide citrique
    Daniela Ruiz Escobar
    Cette recherche a été menée dans une entreprise spécialisée dans la production et la commercialisation d’additifs alimentaires, qui utilise plusieurs produits chimiques organiques tels que l’acide citrique comme matière première dans la fabrication de ses produits. Cette étude se concentre sur la ligne de production des arômes en poudre, car il a été déterminé que l’exposition ...
    Disponible

    55,22 €

  • Design of Four Slope Solar Still
    Prof.K. Anandhu / Prof.S. Sivaranjani / Prof.T. Krishnamoorthi
    Solar Distillation plays major role to convert the brackish and salt water into portable water. Because energy crisis plays a major role in the world due to the increased birth rate and decreased death rate which leads to the high consumption and degradation of natural resources. From now the source of fresh water must acquire from great oceans and seas that can be distilled by...
    Disponible

    72,02 €

Otros libros del autor

  • KUGELFALLTEST AUF ALUMINIUMBLECH
    DEVAN P D
    In dieser umfassenden Studie wird die dynamische Wechselwirkung zwischen Stahlkugeln und Aluminium 8011 untersucht, wobei der Schwerpunkt auf der stoßinduzierten Verformung und der Dehnungsenergie liegt. Dies geschieht durch eine Kombination aus experimentellen Tests und Finite-Elemente-Analysen mit Ansys Workbench. Der Versuchsaufbau umfasst kontrollierte Stöße von Stahlkugeln...
    Disponible

    61,44 €

  • ENSAYO DE CAÍDA DE BOLA SOBRE CHAPA DE ALUMINIO
    DEVAN P D
    En este estudio exhaustivo, exploramos la interacción dinámica entre bolas de acero y aluminio 8011, centrándonos en la deformación inducida por impacto y la energía de deformación. Mediante una combinación de pruebas experimentales y análisis de elementos finitos con Ansys Workbench. El montaje experimental incluye impactos controlados de bolas de acero sobre probetas de alumi...
    Disponible

    61,44 €

  • ESSAI DE CHUTE DE BALLE SUR UNE TÔLE D’ALUMINIUM
    DEVAN P D
    Dans cette étude approfondie, nous explorons l’interaction dynamique entre les billes d’acier et l’aluminium 8011, en nous concentrant sur la déformation et l’énergie de déformation induites par l’impact. Nous avons combiné des essais expérimentaux et une analyse par éléments finis à l’aide d’Ansys Workbench. Le dispositif expérimental comprend des impacts contrôlés de billes d...
    Disponible

    61,44 €

  • TEST DI CADUTA DELLA PALLA SU LAMIERA DI ALLUMINIO
    DEVAN P D
    In questo studio completo, esploriamo l’interazione dinamica tra sfere di acciaio e alluminio 8011, concentrandoci sulla deformazione indotta dall’impatto e sull’energia di deformazione. Attraverso una combinazione di prove sperimentali e analisi agli elementi finiti con Ansys Workbench. L’impostazione sperimentale prevede impatti controllati di sfere d’acciaio su campioni di a...
    Disponible

    61,44 €

  • ENSAIO DE QUEDA DE BOLA EM CHAPA METÁLICA DE ALUMÍNIO
    DEVAN P D
    Neste estudo abrangente, exploramos a interação dinâmica entre as esferas de aço e o alumínio 8011, centrando-nos na deformação por tensão induzida pelo impacto e na energia de tensão. Através de uma combinação de testes experimentais e análise de elementos finitos utilizando o Ansys Workbench. A configuração experimental envolve impactos controlados de esferas de aço em amostr...
    Disponible

    61,44 €

  • DROP BALL TEST ON ALUMINIUM METAL SHEET
    DEVAN P D
    In this comprehensive study, we explore the dynamic interaction between steel balls and aluminum 8011, focusing on the impact-induced strain deformation and strain energy. Through a combination of experimental testing and finite element analysis using Ansys Workbench. The experimental setup involves controlled impacts of steel balls on aluminum specimens, capturing real-world d...
    Disponible

    61,44 €