Inicio > Tecnología, ingeniería, agricultura > Ingeniería mecánica y de materiales > Ingeniería mecánica > MEM09007
MEM09007

MEM09007

Warren Blackadder

25,31 €
IVA incluido
Disponible
Editorial:
Lulu Press
Año de edición:
2022
Materia
Ingeniería mecánica
ISBN:
9781471676772
25,31 €
IVA incluido
Disponible
Añadir a favoritos
Sobre IBD

This unit of competency defines the skills and knowledge required to use manual drafting or drawing equipment to produce mechanical assembly and layout detail drawings to AS 1100 Technical drawing or equivalent.Skills covered by this unit are applied individually or in a team environment where comprehensive responsibility for the production of the drawing is exercised, and critical dimensions and associated tolerances are determined where required.

Artículos relacionados

  • Lab Manual-MSOE02-UFPT
    Dr. Medhat Khalil / DrMedhat Khalil / Medhat khalil
    Universal Trainer Lab Manual associated with the text book HSV2 and course MSOE02 (Electro-Hydraulic Components and Systems). The manual contains lab numbers 20 to 29. It also contains instructions about the lab objectives, the devices used in the lab, the step-by-step procedure of the lab and the expected observations. ...
    Disponible

    27,55 €

  • Reliability in Power Electronics and Electrical Machines
    Hashem Oraee / Shahriyar Kaboli
    In modern industries, electrical energy conversion systems consist of two main parts: electrical machines and power electronic converters. With global electricity use at an all-time high, uninterrupted operation of electrical power converters is essential. Reliability in Power Electronics and Electrical Machines: Industrial Applications and Performance Models provides an in-dep...
    Disponible

    334,82 €

  • Introduction to Engineering Design, Book 11, 4th Edition
    Jim Dally
    This book is the fourth edition of the eBook edition of the eleventh textbook in this series: Introduction to Engineering Design.  Jim Dally, working with College House Enterprises, LLC and faculty members in the Keystone Program within the Clark School of Engineering, has prepared ten previous textbooks in this series—a new one almost every 18 months.  These books are written ...
    Disponible

    79,79 €

  • EMBEDDED COOLING OF ELECTRONIC DEVICES
    JUSTIN A WEIBEL MEH MADHUSUDAN IYENGAR
    This book is a comprehensive guide on emerging cooling technologies for processors in microelectronics. It covers various topics such as chip-embedded two-phase cooling, monolithic microfluidic cooling, numerical modeling, and advances in materials engineering for conduction-limited direct contact cooling, with a goal to remedy high heat flux issues.The book also discusses the ...
    Disponible

    182,29 €

  • Ice-templated polymer hybrids structure and properties
    S. Karthika
    'Ice-templated Polymer Hybrids: Structure and Properties' written by S. Karthika is a comprehensive book that explores the fascinating world of macroporous particle polymer hybrid assemblies, which are created through ice-templating techniques. The book delves into the complex structure and properties of these materials, providing an in-depth analysis of their physical, chemica...
  • Motorcycle Design
    James Sadauckas / Roberto Lot
    This book aims to provide the core concepts of motorcycle dynamics and illustrates their application in vehicle design to readers who have a serious interest in the subject and in particular engineers with a career path in the powered two wheelers sector. ...
    Disponible

    83,23 €

Otros libros del autor

  • MEM16006 Organise and communicate information
    Warren Blackadder
    This unit of competency covers the skills and knowledge required to access, organise and communicate information related to production, maintenance or associated processes or tasks that apply in manufacturing, engineering or related environments. ...
    Disponible

    25,93 €

  • MEM12024 Perform computations
    Warren Blackadder
    This unit of competency defines the skills and knowledge required to estimate approximate answers to arithmetical problems, carry out calculations involving percentages and proportions, and determine simple ratios and averages. It also covers producing and interpreting simple charts and graphs in manufacturing, engineering, or related environments. ...
    Disponible

    24,08 €

  • MEM09002 Interpret technical drawing
    Warren Blackadder
    This unit of competency defines the skills and knowledge required to interpret technical drawings.Technical drawings may utilize perspective, exploded views or hidden view techniques and may include symbol glossaries. Drawings are provided to AS 1100 Technical drawing or AS 1102 Graphical symbols and their equivalents from the full range of engineering disciplines.Where any tec...
    Disponible

    25,20 €

  • MEM30031A Operate computer-aided (CAD) system to produce basic drawing
    Warren Blackadder
    This unit of competency covers the skills and knowledge required to apply functions of computer-aided software programs that are typically used in the production of detail drawings.The unit is suitable for those working within a CAD or drafting work environment and may be applied across engineering and manufacturing environments. It covers competent use of a CAD program to perf...
    Disponible

    32,54 €

  • MEM16008 Interact with computer technology
    Warren Blackadder
    This unit covers accessing, inputting and storing information used in manufacturing, engineering or related environments, using computing technology.The aim of this unit is to develop your skills in interacting with different commonly used software programs. Each lesson gives an introduction to the software and interacts with other programs. Specific courses and units are avai...
    Disponible

    26,84 €

  • MEM12025 Use graphical techniques and perform simple statistical computations
    Warren Blackadder
    This unit of competency defines the skills and knowledge required to interpret and construct graphs and charts from given or determined data, and perform basic statistical calculations.Graphs and charts apply to information from various work contexts, quality processes, production and market trends and other engineering applications and a range of devices are used to assist wit...
    Disponible

    22,96 €