AlMg1SiCu Hybrid Composites

AlMg1SiCu Hybrid Composites

ANAND T / ARUN M / RAGUPATHY K

60,38 €
IVA incluido
Disponible
Editorial:
KS OmniScriptum Publishing
Año de edición:
2024
ISBN:
9786207652136
60,38 €
IVA incluido
Disponible
Añadir a favoritos
Sobre IBD

AlMg1SiCu alloy plays an important role in the fabrication of hybrid aluminium Metal Matrix Composites (MMCs) and it is widely utilized in all types of manufacturing and research fields owing to their high strength-to-weight ratio, high stiffness, good wear resistance and low coefficient of thermal expansion. AlMg1SiCu alloy could be reinforced with ceramics particles in order to improve its specific physical properties.

Artículos relacionados

Otros libros del autor

  • Nanocompósito de mistura Nanoclay EPDM/SBR
    ANAND T / ARUN M / RAGUPATHY K
    Foi preparada uma mistura de monómero de etileno-propileno-dieno (EPDM)/SBR com nanoargila. O enxofre foi utilizado como agente de vulcanização para os nanocompósitos. Foi investigado o efeito da carga de nanoargila e dos sistemas de reticulação nas características de cura, nas propriedades mecânicas, na resistência à abrasão, na dureza, na resiliência ao ressalto,no conjunto d...
    Disponible

    60,44 €

  • NANOCLAY EPDM/SBR BLEND NANOCOMPOSITE
    ANAND T / ARUN M / RAGUPATHY K
    A blend of Ethylene-Propylene-Diene Monomer (EPDM)/SBR with nano clay was prepared. Sulphur was used as vulcanizing agents for the nanocomposites. The effect of nano clay loading and crosslinking systems on the cure characteristics ,mechanical properties, abrasion resistance, hardness, rebound resilience, compression set, swelling resistance and water uptake ofEPDM/SBR nanocomp...
    Disponible

    60,32 €

  • DRY SLIDING WEAR BEHAVIOUR OF HEAT TREATED (T6) ALUMINUM COMPOSITE
    ANAND T / ARUN M / RAGUPATHY K
    In this study, Al6061 was reinforced with equal (4-16 wt. %) percentages ofSiC/MoS2 particles through stir casting technique. The cast samples were subjected toT6 Heat treatment. Artificial ageing treatment was carried out for a different du-ration (4-12 hours) with constant temperature of (155 o C). Wear tests was carried out by using pin on disc apparatus based on Taguchi’s d...
    Disponible

    60,13 €

  • WEAR BEHAVIOUR OF ALUMINUM HYBRID COMPOSITE BY USING TAGUCHI METHOD
    ANAND T / ARUN M / RAGUPATHY K
    The present study, the effect of dry sliding wear behaviour of aluminium composites has been investigated. Aluminium matrix reinforced with SiC and MoS2 in this project. Aluminium alloy series Al6061 is used as matrix, Silicon Carbide particles (SiC) and Molybdenum disulphide particles (MoS 2 ) are used as reinforcements. The composite materials to be fabricated by using stir c...
    Disponible

    60,20 €

  • SWELLING RESISTANCE OF NANO POLYMER NANOCOMPOSITE
    ANAND T / ARUN M / RAGUPATHY K
    The ethylene-propylene-diene monomer/styrene-butadiene rubber (EPDM/SBR)-nanosilica (SiO2) nanocomposite was prepared. The 0-10 parts per hundred rubber (phr) of SiO2 with EPDM/SBR was mixed on a two-roll mill. The effect of nanosilica (0-10 phr), and silane coupling agent (bis(triethoxysilylpropyl)-tetrasulphide) (TESPT) on the curing characteristics, mechanical properties, re...
    Disponible

    60,13 €

  • COMPORTAMENTO DE DESGASTE SÓLIDO LUBRIFICADO DE COMPOSTOS HÍBRIDOS DE ALUMÍNIO
    ANAND T / ARUN M / RAGUPATHY K
    O presente estudo, o efeito do comportamento de desgaste deslizante seco dos compósitos de alumínio foi investigado. Matriz de alumínio reforçada com SiC e MoS2 neste projecto . Asérie Al6061 de liga de alumínio é utilizada como matriz, as partículas de carboneto de silício (SiC) e as partículas de bissulfureto de molibdénio (MoS2) são utilizadas como reforços. Os materiais com...
    Disponible

    61,63 €