Catálogo de libros: Ingeniería mecánica y de materiales

11088 Catálogo de libros: Ingeniería mecánica y de materiales

Tecnología, ingeniería, agricultura / Ingeniería mecánica y de materiales
Libros Eliminar filtro Inglés Eliminar filtro Tecnología, ingeniería, agricultura Eliminar filtro Ingeniería mecánica y de materiales Eliminar filtro Quitar filtros
  • Excel-VBA
    Stoyanka Ivanova / Tariq Muneer
    This compact text is a powerful introduction to the Excel/VBA computing environment. The book presents some of the most useful features of Excel. First by introducing mathematical puzzles that will grab the reader’s attention with the reader invited to think hard on solving those puzzles. Then, solutions are presented in a logical manner. The book goes on to describe modern and...
    Disponible

    48,32 €

  • Foreign Object Debris and Damage in Aviation
    Ahmed F. El-Sayed
    Foreign Object Debris and Damage in Aviation discusses both biological and non-biological Foreign Object Debris (FOD) and associated Foreign Object Damage (FOD) in aviation. It is written for aviation industry personnel, aircraft transport and ground operators, and aircraft pilots. ...
    Disponible

    266,62 €

  • Passive Vibration Control of Structures
    Suhasini Madhekar / Vasant Matsagar
    Research in structural vibration control deals with catastrophic failures of civil structures during natural hazards. ...
    Disponible

    313,26 €

  • New Theory and Design of Ellipsoidal Heads for Pressure Vessels
    Jinyang Zheng / Keming Li
    This book is the first monograph focusing on ellipsoidal heads, which are commonly used as an end closure of pressure vessels in chemical, petroleum, nuclear, marine, aerospace and food processing industries. It provides a comprehensive coverage of stress, failure, design and fabrication of ellipsoidal heads. This book investigates in detail buckling/plastic collapse behaviors ...
    Disponible

    222,06 €

  • Computational Fluid Dynamics and the Theory of Fluidization
    Dimitri Gidaspow / Huilin Lu / Shuyan Wang
    This book is for engineers and students to solve issues concerning the fluidized bed systems. It presents an analysis that focuses directly on the problem of predicting the fluid dynamic behavior which empirical data is limited or unavailable. The second objective is to provide a treatment of computational fluidization dynamics that is readily accessible to the non-specialist. ...
    Disponible

    222,07 €

  • Food Packaging
    Anup K. Ghosh / Meenakshi Garg / N. C. Saha
    This comprehensive and authoritative book aims to encompass the best and current practices in the field of contemporary food packaging. It covers various aspects of packaging, including challenges and their solutions, innovations, and environmental concerns. Written by experts working in the field, the content is supported by technical/statistical data, practical examples, case...
    Disponible

    245,86 €

  • Automatic Structural Synthesis and Creative Design of Mechanisms
    Andrés Kecskeméthy / Huafeng Ding / Wenjian Yang
    This book provides a comprehensive overview of the current research status and open problems in the field of structural synthesis, based on which a systematic methodology for the structural analysis of planar kinematic chains, structural synthesis of planar kinematic chains, and creative design of mechanisms is presented.The method presented in this book not only promotes the d...
    Disponible

    208,76 €

  • Engineering Design Applications IV
    This book presents the developments in engineering design application. The chapters on mechanical, materials, computer and process engineering provide the foundation for the design and development of improved structures, materials and processes. They present alternatives with cost reduction and environmental demands. The book content links the interaction of classical engineeri...
    Disponible

    220,90 €

  • Crosslinkable Polyethylene
    This volume covers various aspects of cross-linked polyethylene (XLPE). The contents include manufacture, morphology, structure, properties, applications, early stage development, cross-linking techniques, recycling process, physical and chemical properties as well as the scope and future aspects of XLPE. It focuses on the life cycle analysis of XLPE and their industrial applic...
    Disponible

    247,37 €

  • Advances in Service and Industrial Robotics
    This book presents the proceedings of the 30th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2021, held in Poitiers, France, 21-23 June 2021. It gathers contributions by researchers from several countries on all major areas of robotic research, development and innovation, as well as new applications and current trends. The topics covered include: novel ...
    Disponible

    271,55 €

  • Proceedings of the International Conference on Advanced Mechanical Engineering, Automation, and Sustainable Development 2021 (AMAS2021)
    This book presents selected, peer-reviewed proceedings of the International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development 2021 (AMAS2021), held in the city of Ha Long, Vietnam, from November 4 to 7, 2021. AMAS2021 is a special meeting of the International Conference on Material, Machines and Methods for Sustainable Development (MMMS), wit...
    Disponible

    273,85 €

  • Elements of Machine Design
    Dexter S. Kimball / John H. Barr
    Introductory, Definitions and fundamental principles of machine design, The energy and force problem, consideration of machines as a means of modifying energy, Straining actions in machine elements fundamental formulas for strength and stiffness, Friction, lubrication and efficiency, springs, Riveted fastenings, screws and screw fastenings, Keys, cotters, and force fits, Tubes,...
    Disponible

    39,27 €

  • Engineering Thermodynamics
    James Ambrose Moyer
    Introduction to the theory of heat engines, Properties of perfect gases, Expansion and compression of gases, Cycles of heat engines, Properties of steam, Practical applications of thermodynamics, Entropy, Practical steam expansions and cycles, Flow of fluids, ...
    Disponible

    23,22 €

  • Jigs and Fixtures
    Fred H. Colvin / Lucian L. Haas
    System in the Tool Room, The different kinds of jigs, Locating schemes for drill jigs, Standard bushing for drill jigs, Some of the details of jig making, Miscellaneous jig details, Jig clamps and clamping methods, Milling fixtures of various types, Pneumatic fixtures for holding work, Uses and advantages of the latch jig, Designs of and materials for gages, External and intern...
    Disponible

    17,65 €

  • The Theory of Engineering Drawing
    Alphonse Andrew Adler
    Part 1 The principles of parallel projecting-line drawing, Introductory, Oblique projection, Orthographic projection, Axonometric projection, Part II Geometrical problems in orthographic projection, Representation of lines and points, Representation of planes, Elementary considerations of lines and planes, Problems involving the point, the line, and the plane, Classification of...
    Disponible

    30,73 €

  • The Theory of Machines
    Robert W. Angus
    The Principles of Mechanism, The nature of the machine, Motion in machines, Velocity diagrams, The motion diagram, Toothed Gearing, Bevel and spiral gearing, Trains of gearing, Cams, Forces acting in machines, Crank effort and turning moment diagrams, The efficiency of machines, Part II Mechanics of machinery, Governors, Speed Fluctuations in machinery, The proper weight of fly...
    Disponible

    31,78 €

  • Advances in Manufacturing III
    This book covers a variety of topics at the interface between biomedical engineering and manufacturing. Based on peer-review papers presented at the 7th International Scientific-Technical Conference MANUFACTURING 2022, held in Poznan, Poland on May 16-19, 2022, it focuses on cutting-edge issues relating to  3D printing of medical devices, including custom manufacturing of ortho...
    Disponible

    209,72 €

  • Flow boiling and condensation in microscale channels
    Fabio Toshio Kanizawa / Gherhardt Ribatski
    This book covers aspects of multiphase flow and heat transfer during phase change processes, focusing on boiling and condensation in microscale channels. The authors present up-to-date predictive methods for flow pattern, void fraction, pressure drop, heat transfer coefficient and critical heat flux, pointing out the range of operational conditions that each method is valid. Th...
    Disponible

    197,76 €

  • High Performance Simulation for Industrial Paint Shop Applications
    Kevin Verma / Robert Wille
    This book describes the current state of the art for simulating paint shop applications, their advantages and limitations, as well as corresponding high-performance computing (HPC) methods utilized in this domain. The authors provide a comprehensive introduction to fluid simulations, corresponding optimization methods from the HPC domain, as well as industrial paint shop applic...
    Disponible

    68,18 €

  • Cold Spray Additive Manufacturing
    Rocco Lupoi / Shuo Yin
    This book systematically describes the status quo and future development of cold spray additive manufacturing technology. It starts with a comprehensive introduction to the fundamentals of cold spray additive manufacturing, including its history, working principle, equipment, processing parameters and powder feedstock. It then discusses the fundamentals of and the latest develo...
    Disponible

    222,06 €

  • Modelling and Optimization of Photovoltaic Cells, Modules, and Systems
    Carlos David Rodríguez Gallegos
    This book presents a study to determine the current limitations in the area of Photovoltaics (PV) as a source of renewable energy and proposes strategies to overcome them by applying optimization approaches in three main areas, namely related to photovoltaic solar cells, modules, and systems. These include grid metallization design of Si-based solar cells and modules; cost-effe...
    Disponible

    221,97 €

  • Wood Polymer Composites
    This book comprehensively covers the different topics of wood polymer composite materials mainly synthesis methods for the composite materials, various characterization techniques to study the superior properties and insights on potential advanced applications. It also discusses the chemistry, fabrication process, properties, applications, recycling and life cycle assessment of...
    Disponible

    246,91 €

  • Uncertainty in Acoustics
    Robert Peters
    This guide to estimating uncertainties in the measurement, prediction and assessment of noise and vibration applies across environmental noise and vibration, occupational noise and vibration exposure, and building and architectural acoustics.This book collates information from the various standards and from research, with explanation, examples and case studies. It enables estim...
    Disponible

    78,94 €

  • ADVANCED LIQUID METAL COOLING FOR CHIP, DEVICE AND SYSTEM
    JING LIU
    This compendium summarizes the core principles and practical applications of a brand-new advanced chip cooling category - liquid metal cooling. It illustrates the science and art of room temperature liquid metal enabled cooling for chip, device and system. The concise volume features unique scientific and practical merits, and clarified intriguing liquid metal coolant or medium...
    Disponible

    245,37 €

  • Levelized Cost of Energy in Sustainable Energy Communities
    Giorgio Piazza / Miguel de Simón-Martín / Stefano Bracco
    The main aim of this book is to provide a state of the art of the Levelized Cost of Energy calculation for energy communities from both a theoretical, defining a systematic analysis approach, and a practical point of view, providing results for three representative real case studies.The book is structured in four clear chapters which cover everything from the fundamentals of po...
    Disponible

    68,15 €

  • Nonlinear Mechanics for Composite Heterogeneous Structures
    Georgios A. Drosopoulos / Georgios E. Stavroulakis
    This book applies both classical and multi-scale finite element analysis to the non-linear, failure response of composite structures. It uses continuum mechanics for investigating failure at the macroscopic structural scale, and advanced discrete methods for simulating constituent materials and their nonlinear behaviour. ...
    Disponible

    267,85 €

  • Laser Power Stabilization via Radiation Pressure
    Marina Trad Nery
    This book offers a comprehensive and complete description of a new scheme to stabilize the power of a laser on a level needed for high precision metrology experiments. The novel aspect of the scheme is sensing power fluctuations via the radiation pressure driven motion they induce on a micro-oscillator mirror. It is shown that the proposed technique can result in higher signals...
    Disponible

    48,38 €

  • Mechanics of Fretting and Fretting Fatigue
    David A. Hills / Hendrik N. Andresen
    This book, which has only one very distant forerunner authored by David A. Hills with David Nowell, represents a very big step that is the quantification of these problems and represents the twenty-five years’ worth of work which have gone on at Oxford since the first book on the subject. Fatigue (popularly ’metal fatigue’) is the primary failure mode of all machines, engines, ...
    Disponible

    222,16 €

  • Advances in Mechanical Engineering and Material Science
    This book presents select proceedings of the 1st International Conference on Advances in Mechanical Engineering and Material Science (ICAMEMS 2022). It discusses about the diverse technological advancements, innovations, and achievements in the areas of mechanical engineering and material science. It also covers the developments and challenges in the field of machine design, ma...
    Disponible

    307,08 €

  • Computational Intelligence Techniques for Green Smart Cities
    This book contains high-quality and original research on computational intelligence for green smart cities research. In recent years, the use of smart city technology has rapidly increased through the successful development and deployment of Internet of Things (IoT) architectures. The citizens’ quality of life has been improved in several sensitive areas of the city, such as tr...
    Disponible

    196,86 €


Primera 38 39 40 41 42 43 44 45 46 47 Última