Catálogo de libros: Ingeniería: general

3072 Catálogo de libros: Ingeniería: general

Tecnología, ingeniería, agricultura / Tecnología: cuestiones generales / Ingeniería: general
Libros Eliminar filtro Inglés Eliminar filtro Tecnología, ingeniería, agricultura Eliminar filtro Tecnología: cuestiones generales Eliminar filtro Ingeniería: general Eliminar filtro Quitar filtros
  • PERFORMANCE OF R.C.C BUILDING FOR FLOOR WISE REDUCTION OF COLUMN
    Prashant Bamane / Rakesh Salunke / Shital Ghate
    These book deals with the comparative study of performance of multistory R.C.C. building for floor wise reduction of column cross section and constant column cross section. For this study a G+6 storey R.C.C. building in Zone IV is selected. Horizontal seismic forces are calculated based on Equivalent static method. The R.C.C component like beam and column are designed by prepar...
    Disponible

    59,27 €

  • Filament extruder for 3D printing
    Gabriel Delorenci / Lucas Aquino
    The present work aims to design a filament extruder for 3D printing that uses recycled plastic material. Material that represents a major environmental problem and had a considerable increase in production in recent years. The dimensioning and selection of the elements present in the machine were developed, such as the extrusion set, the heating blanket, the electric motor, and...
    Disponible

    87,12 €

  • Lower limb rehabilitation equipment
    PETRE Ioana Mădălina
    Known for the high incidence of disabilities caused by post-traumatic joint disorders of the lower limbs, this book aims a rigorous theoretical and experimental study on the possibility of accelerated recovery of patients by means of high-performance rehabilitation equipment operated by pneumatic muscles. Given the fact that the studies carried out so far in the field of physio...
    Disponible

    85,12 €

  • Engineering Critical Assessment (ECA) for Offshore Pipeline Systems
    Daowu Zhaou / Daowu Zhou / Dr. T Sri / Graeme Roberts
    Engineering Critical Assessment (ECA) of offshore pipeline systems is a complex and challenging process. The potential for fatigue and fracture of pipeline welds needs to be assessed at the design stage to ensure that the integrity of a pipeline system is maintainedduring its installation and for its full life cycle. This book brings a holistic view of ECA in a way that is acce...
    Disponible

    59,23 €

  • Incremental Forming
    Pratheesh Kumar S
    The incomparable presence of sheet metal forming in the manufacturing industries stimulates significant research interest to explore and improve the process. Sheet metal forming sector witnessed a technology shift in recent years and is moving towards process automation leading to new emerging technologies. One such emerging technique that has a higher degree of process versati...
    Disponible

    133,30 €

  • Experimental Investigation on Aluminium Alloyusing FrictionStirWelding
    K.L. Narayana / M. Rama Gopala Сharyulu / M.L. Pavan Kishore
    Friction stir welding is a relatively new joining process which involves the following metals without fusion of tiller materials. The amount of the heat conducted into the work piece dictates a successful process which is defined by the quality, shape and micro structure of the processed zone as well as the residual stress and the distortion of the work piece. The amount of the...
    Disponible

    60,32 €

  • Car forklift prototype focused on work ergonomics
    Clóvis da Costa Mandoline Bento / Fernando Sabino Fonteque Ribeiro / Ítalo Redondo de Moraes
    This work aims to present an improvement for a type of cargo vehicle in which its main application is to use it in reduced spaces, presenting briefly the main aspects to be considered during the design and construction. It proposes structural improvements, movement automation, and the implementation of a self-adjusting platform, aiming at a more practical operation, ergonomic i...
    Disponible

    62,02 €

  • A Brief Overview on Environmental Friendly Machining Techniques
    Binit Kumar Jha / Rajeev Sharma / Vipin Pahuja
    This book deals with Environmentally friendly machining. It is one of the latest approaches which is economical and also eco-friendly that improves machinability. In the present article the main focus is on understanding of environmentally friendly machining and explores different insights from the past literature which can assist the better adoption of environmentally friendly...
    Disponible

    60,20 €

  • Optimizing old car engines in restoration. Part 4
    Ilya Romanov
    Since one of the directions of optimization of the engines of old (historical) cars in restoration is the transfer of the engine completely into a new category and with it the transfer of the car into the category of electric cars, there is a need for an innovative approach to this issue as well.Since the structure of the historical car is not quite adapted to the overheating c...
    Disponible

    50,00 €

  • Integration of non-contact control systems into water meters. Part 1
    Evgeny Kopylov
    Each part of the book contains a description of innovative design, constructive and technological methods for integrating non-contact complex analytical control systems into standard water meters without changing the operating principles and constructive methods for manufacturing and installing meters.In the book the fundamental issues of schematic solutions of a control module...
    Disponible

    49,93 €

  • Productivity Improvement in Garment Manufacturing Process
    Atul Shukla / Dharmendra Tyagi
    The purpose of this study is to discuss lean implementation and its quantified benefits for the textile industry. Both current and future state maps of the organization’s shop floor scenarios are discussed using lean techniques in order to highlight improvement areas and to bridge the gap between the existing state and the future state of the shop floor of the textile industry....
    Disponible

    60,58 €

  • My Research Experience
    Ajay Kumar Choubey
    I am Dr. Ajay Kumar Choubey, this book based on my research experience. I have worked as researcher in various research project, funding, government projects etc. By the help of different articles, you can experience a journey of research from basic to advance level. The findings covered FEM, Mechanical, Material based area, so any student, faculty, professional will get advanc...
    Disponible

    60,58 €

  • Dry Machining and Cutting Fluids used in Industries
    Atul Agnihotri / Jasjeevan Singh / Simranpreet Singh Gill
    Cutting fluids provide cooling at the cutting tool and on the surface of work piece, lubricate the tool-workpiece interface and evacuate chips from the cutting zone in the machining processes. The primary reason for using cutting fluid is to reduce the temperature at cutting zone and friction wear either through cooling or lubrication. To maximize the efficiency of cutting flui...
    Disponible

    60,13 €

  • Physical and chemical processes during the firing of porcelain
    Ashrap Mamurovich Eminov
    The paper presents the results of the study of structure formation of porcelain materials based on kaolin and microsilica-waste from ferrosilicon production of the metallurgical industry. It was found that in contrast to the classical composition of porcelain, up to 10 % of microsilica was introduced into the composition. ...
    Disponible

    49,68 €

  • Basics of optimizing metalworking modes
    Akramova Komila Shuxrat qizi
    Since the beginning of this century, a huge amount of scientific research in the field of metalworking technology has been carried out. Since the 1950s, the general theory of optimization problem solving and, on its basis, various methods of optimization of metalworking processes have been intensively developed. Increasing efficiency of machine building production, transition t...
    Disponible

    49,68 €

  • Optimizing old car engines in restoration. Part 1
    Ilya Romanov
    The book considers technological issues of comprehensive restoration of cars produced in the 40’s and integration in their design elements of the latest structural and design solutions that have emerged in the automotive engineering and related fields in recent times.In the sections of the book are presented original innovative solutions for modernization of the fuel system of ...
    Disponible

    49,81 €

  • Fundamentals of Mechanical Engineering for Beginners
    Durga Prasad Channabasavaiah / Harish Hanumanthappa
    This book, Fundamentals of Mechanical Engineering for Beginners, is a wonderful compendium comprising all the ingredients required by an engineering student of any discipline. In the present age of interdisciplinary significance, understanding the fundamentals of other related branches is extremely important and the authors have succeeded with the content written in a lucid and...
    Disponible

    111,65 €

  • Technology of production of medicinal drinks from Alhagi
    MUZAFFAR DADAMIRZAEV / SAMARA TOSHBOYEVA
    Today, the demand for natural and cheap food products is increasing day by day. However, food products cannot be said to be sufficient to meet today’s demand. Increasing such types of products is one of the urgent problems of today.In this monograph, our cool and traditional drinks, which rank high in today’s consumption, their quality levels, detailed information is given abou...
    Disponible

    60,32 €

  • IoT Quadcopter
    Narayanasamy P. / Parrthipan B. K.
    Now a day’s the technology of IoT (Internet of things) plays a major role in industries by giving the most advancement in manufacturing and increasing productivity. The companies were also focusing on Industry 4.0 to be in the race for future technology. By this, Engineers all over the world are also focusing on IoT. In 1915, Nikola Tesla paved the way for UAV’s and he complete...
    Disponible

    60,38 €

  • Estimation of Uncertainty in Hardness Measurement Systems
    T. Anand
    Every day, quantitative measures are made. A specified set of criteria determines the precision of these measurements. Measurements may need to be of low accuracy for one organisation while being of great accuracy for another. No measurement is exact, despite the rules being in place. Every measurement result contains a unique level of uncertainty, regardless of how careful or ...
    Disponible

    60,20 €

  • EFFECTS OF MOULDING SAND IN SAND MOULD CASTING AND IT’S DEFECT FINDING
    SOMNATH MITRA
    Sand casting, as the name implies, is the process of metal casting in which the mould is made of sand. There are mainly two types of sand are found for casting process with respect to their grain size, one is coarse grain sand and another one is fine grain sand. By preparing them in same procedure like moisture content test, clay content test, refractoriness test, strength test...
    Disponible

    71,16 €

  • Numerical Methods in Civil Engineering
    Hossein Gholami / Hossein Norouzi / Shahide Dehghan
    The objective of this book is to provide students with fundamental knowledge of finite element analysis and how to apply this knowledge to the solution of civil engineering problems at intermediate and advanced levels. At the end of this unit, students should acquire knowledge of methods of formulating finite element equations, basic element types, the use of finite element met...
    Disponible

    60,64 €

  • Optimizing old car engines in restoration. Part 2
    Ilya Romanov
    The author offers basic information on the design and operating principles of a device for mixing, linear homogenization and dynamic activation of fuel mixtures to obtain the possibility of their application after optimizing the engines of old cars after their restoration.In this book you can read about his first scientific innovation project and appreciate the ideas that are a...
    Disponible

    49,93 €

  • Optimizing old car engines in restoration. Part 3
    Ilya Romanov
    As the main basis for the optimization of internal combustion engines, the materials of the book show the linear homogenization of the fuel mixture built on the principles of modern pioneering inventions that perform dynamic homogenization in parallel with mixing of fuel components, in which after mixing a homogeneous fuel emulsion is formed in which the water content can be br...
    Disponible

    49,74 €

  • Integration of non-contact control systems into water meters. P2
    Evgeny Kopylov
    Each part of the book contains a description of innovative design, constructive and technological methods for integrating non-contact complex analytical control systems into standard water meters without changing the operating principles and constructive methods for manufacturing and installing meters.In the book the fundamental issues of schematic solutions of a control module...
    Disponible

    49,74 €

  • Integration of non-contact control systems into water meters. P3
    Evgeny Kopylov
    Each part of the book contains a description of innovative design, constructive and technological methods for integrating non-contact complex analytical control systems into standard water meters without changing the operating principles and constructive methods for manufacturing and installing meters.In the book the fundamental issues of schematic solutions of a control module...
    Disponible

    49,68 €

  • Nuclear Plant Thermodynamics for System and Design Engineers
    Charles F Bowman / Seth N Bowman
    Chuck Bowman Associates, Inc. has trained hundreds of practicing system and design engineers in the nuclear industry in heat exchanger analysis and thermodynamics. In the past the author has been asked to provide the training material contained in this book for on-site training by others. These requests have been denied for obvious reasons. However, after 50+ years as a practic...
    Disponible

    44,82 €

  • Zirconia Nano Particles Reinforced Aluminium Nanocomposites
    Malik Shahzad Mahvi
    The aim involved in designing metal matrix composite materials is to combine the desirable attributes of metals and ceramics. The addition of high-strength, high-modulus refractory particles to a ductile metal matrix produces a material whose mechanical properties are intermediate between the matrix alloy and the ceramic reinforcement. Aluminium is the most abundant metal in th...
    Disponible

    84,48 €

  • Bio-Active Coating materials used to coat on Biopolymers
    Akarsh S / Hanumantharaju H G / Venkatesh N
    Bio polymers are widely used for bio implantation purposes in medical field due to its corrosion resistance, good wear properties and mechanical properties. In this book, in order to increase the life span of the implantation, coating process is applied on the PVC, TEFLON, and POLYURATHANE to form a thin film barrier. Hydroxyapatite (HAP) which is currently used as coating mate...
    Disponible

    51,30 €

  • A Text Book on Mobile Robot Path Planning and Navigation Control
    Jagadish Chandra Mohanta / Mohd. Nayab Zafar
    This book offers students and robotic researchers an introduction to the fundamentals of Mobile Robot Path Planning and Navigation Control in various environments using different Artificial Intelligence (AI) techniques. The text focuses an overview of the mechanism and different techniques that allow a mobile robot to move in a real world environment to perform tasks including ...
    Disponible

    96,11 €


Primera 04 05 06 07 08 09 10 11 12 13 Última