Catálogo de libros: Ingeniería: general

3072 Catálogo de libros: Ingeniería: general

Tecnología, ingeniería, agricultura / Tecnología: cuestiones generales / Ingeniería: general
Libros Eliminar filtro Inglés Eliminar filtro Tecnología, ingeniería, agricultura Eliminar filtro Tecnología: cuestiones generales Eliminar filtro Ingeniería: general Eliminar filtro Quitar filtros
  • Polymeric Composite Materials
    Iulia P. - Graur / Iulian Paduraru
    This book is dedicated to students, teaching staff at the beginning of their university careers, and engineers in the field of composite polymer materials. The content of this book is beneficial and well-documented. The book is structured in ten chapters in which it is explained very clearly, starting from definitions, classifications, applications, technologies for obtaining c...
    Disponible

    96,19 €

  • Walking Ro-Bot
    Amit R Gadekar / Anand S Relkar / Ram Kumar Solanki
    On uneven ground, legged robots have the potential to be a walking machine. Theo Jansen’s mechanism, which consists of eleven bar linkages, reproduces a smooth walking pattern known as gait. Parallel motions are commonly used in heavy machinery and have recently been highlighted in a biological motion model. Due to the singularity problem, the close-loop connection just gives a...
    Disponible

    60,13 €

  • Value Stream Mapping
    Chandan Kumar / Praveen Saraswat / Sandeep Kumar Bhaskar
    Today business environment is highly competitive, so lots of improvements are needed to fulfill customer service levels. In this technological change era, the organization has been focused on customer satisfaction and looking for some changes to improve its working environment. Industries use more capital and resources to increase their productivity. It is essential that they o...
    Disponible

    61,63 €

  • Epoxy Hybrid Composites Filled with Kota Stone Dust and Fly Ash
    Alok Agrawal / Neelesh Sahu / Virendra Rajput
    This book presents an experimental study of the physical, mechanical, and tribological behavior of a new class of polymer-based single-filler composites and hybrid filler composites. The main objective of the work is to explore the possibility of using waste generated from the Kota stone industry and thermal power plant as filler material in epoxy resin in order to develop a ne...
    Disponible

    97,45 €

  • DAMPING BEHAVIOR IN MICROWAVE-ASSISTED SINTERED AL/SiC COMPOSITES
    KARE DORATHI / NARKEDAMILLI TULASI RADHA
    High damping materials with the ability to dissipate mechanical vibration are desirable in structural applications such as submarine propellers and aerospace structures. As a result, in the current situation, finding a material with good mechanical and damping properties is a major challenge. Powder metallurgy is found to be desirable for the fabrication of Al/SiC (Aluminium-si...
    Disponible

    112,91 €

  • Constraint Decision-Making Systems in Engineering
    In recent years, most applications deal with constraint decision-making systems as problems are based on imprecise information and parameters. It is difficult to understand the nature of data based on applications and it requires a specific model for understanding the nature of the system. Further research on constraint decision-making systems in engineering is required. Constr...
    Disponible

    365,63 €

  • Mechanical Technology
    M. MARUTHI RAO / N. Santhi Sree / V. Pavan Kumar
    It is very useful for Marine, Civil and Electrical students and easily understand with clear figures and explanation. Specially civil 2nd year students JNTUA second year students all chapters under one umbrella.Separate chapters for each unit and explanation easily understand for formal language. Technical terms easily understand without knowing basic knowledge. Different chapt...
    Disponible

    61,82 €

  • Wind Energy Conversion System with Dynamic Voltage Restorer
    Kumar K / Lakshmi Devi V
    This book helps the researchers and industrialists working on a novel Doubly-Fed Induction Generator (DFIG) based Wind Energy Conversion System (WECS) which incorporates a Dynamic Voltage Restorer (DVR) and Energy Storage System (ESS). The DVR is in series with the output terminal of a Wind Turbine Generator (WTG) and parallel to the dc link of the WTG with the ESS. The control...
    Disponible

    61,57 €

  • Experimental Investigation of Process Parameters on Abrasive Machine
    Dr. B. ANJANEYULU
    A composite material consisting of more than two materials with considerably different physical and chemical properties comes up with different characteristics compared with individual material. The usage of composite materials is growing day by day due to their inherent properties such as high hardness and lightweight. Mixing various oxide materials makes the composite stronge...
    Disponible

    71,16 €

  • Butanol as a biofuel
    Ashish Nayyar / Chandan Kumar / Naveen Kumar Sain
    Diesel engines are playing a vital role in the field of transportation and power generation. In the present world, much research is going on in the field of renewable energy to replace conventional sources of energy. But it is not very easy to replace diesel engines with other engines when power and reliability are the factors that matter. The emissions from diesel engines are ...
    Disponible

    61,94 €

  • It Looked Good on Paper
    Bill Fawcett
    A remarkable compendium of wild schemes, mad plans, crazy inventions, and truly glorious disastersEvery phenomenally bad idea seemed like a good idea to someone. How else can you explain the Ford Edsel or the sword pistol--absolutely absurd creations that should have never made it off the drawing board? It Looked Good on Paper gathers together the most flawed plans, half-baked ...
    Disponible

    14,22 €

  • REDESIGN OF A PLASMA CUTTING MACHINE.
    Iván Emmanuel Gaytán-Salazar / Pablo Ayala-Hernández
    This book shows the importance of a redesign process of a plasma cutting machine, which benefits a cutting and machining process.The machine was completely redesigned both the numerical control, hardware and software to have a better performance of the machine in terms of operation and maintenance, in addition to obtaining an improvement in the quality of the processed product....
    Disponible

    57,65 €

  • Album of macro- and microstructures of metals and alloys
    Ludmila Baklanenko
    This album contains macro- and microstructures of metals and alloys, flaws of steel and defects of its structures examined with optical microscopes. The main instruments are metallographic microscopes MIM-7 and MIM-8. The album is intended for students as a teaching aid for the courses 'Material Science and Technology of Structural Materials', 'Technology of Structural Material...
    Disponible

    35,31 €

  • Prerequisites for enhancing the completeness of oil and gas recovery
    D.M. Trofimov / L.B. Berman / V.M. Ryzhik
    The low completeness of oil and gas recovery is due to the fact that development projects do not take into account a number of natural phenomena in pools: 1. Multi-scale block-fractured structure of pools; 2. Features of fluid flow through low-permeable rocks, which determine the reservoir compartmentalization; 3. Interaction of oil and condensate with porous media. These pheno...
    Disponible

    117,86 €

  • PROCESS PIPES ASSESSMENT
    Alin DINIȚĂ / Costin Ilincă / Ibrahim RAMADAN Maria TĂNASE
    The present work aims to create a physical model of a process pipeline system, a model that allows studying the operating behavior of the composing elements. The analyzes are carried out based on ASME B31.3 and EN 13480 design codes, and the results are compared with experimental values determined with electrical-resistive tensometry. The necessary costs for the fabrication of ...
    Disponible

    58,24 €

  • Real Time Transient Model-Based Leak Detection
    Meka Harika Chowdary / N V S G SASIKIRAN
    The fundamentals and application of transient model-based leak detection and localization technique for crude oil pipelines. The dynamic parameters such as pressure, flow and temperature were acquired by SCADA (Supervisory Control and Data Acquisition) system. The characteristic changes in the flow mechanics andthermodynamics along a given length of pipeline were used in detect...
    Disponible

    81,90 €

  • Design and Analysis of Deep groove ball bearing
    Er. Javvadi Uma Mahesara Rao
    Ball bearings are one of the most commonly used machine elements. They are employed to permit rotary motions of, or about, shafts in simple commercial devices and also used in complex engineering mechanisms. Deep groove ball bearings are the most widely used bearings in industry and their market share is about 80% of industrial rolling element bearings. Generally structural ste...
    Disponible

    57,71 €

  • Some Aspects of Research in Materials and Mechanical EngineeringIndige
    A Kanni Raj
    The BOOK is a collection of Research and Review Papers published in various Journals in the Academic Year 2018-2022 by Author. The articles discuss over a range of scientific and technological issues, such as The articles discuss over a range of scientific and technological issues, such as Stainless Steel, Martensitic Transformation, Formability, Creep, Modeling, Nanomaterials,...
    Disponible

    139,93 €

  • UPGRADE OF THE LOW VOLTAGE SWITCHBOARD (LVSB) OF GROUP 126
    Amed Hassan
    Historical operator of the electricity sector in Cameroon, ENEO (formerly AES-SONEL) is a mixed economy company with capital held at 51% by the Actis group, 44% end of studies for the Diploma of Technological License carried out at the thermal power plant ENEO Bertoua, there is an increase in the number of groups to alleviate the problem of aging groups and insufficient power a...
    Disponible

    55,22 €

  • An Experimental Study on Rotational Arc Welded HSLA Steel joints
    Vara Prasad Vemu / Vinay Kumar Nadipalli
    In this project, the traditional gas metal arc welding process was modified to rotational arc welding by providing a rotation to the welding torch along with the horizontal traverse motion. Two similar P22 High Strength Low Alloy steel specimens were welded by rotational arc welding process by using ER70S-6 electrode wire under CO2 environment to avoid cracks and slag inclusion...
    Disponible

    93,55 €

  • EFFECT OF SiC, FLY ASH IN AA6061 MMC
    Sarojini Jajimoggala / Shabana Shabana
    The primary objective of this book is to make it available to students, researchers, and those who are working on case study projects. Aluminium and its alloys possess excellent properties such as low density, good plasticity, and ductility. Due to their low density and low-cost reinforcements, Metal Matrix Composites (MMCs) find extensive applications in the aeronautics, astro...
    Disponible

    59,08 €

  • Commercializing Successful Biomedical Technologies
    Shreefal S. Mehta
    ...
    Disponible

    119,49 €

  • Study of Couette Flow Between Parallel Plates
    Soumyodeep Mukherjee
    The mathematical models for both numerical and analytical studies are formulated from Navier Stoke equation along with energy equation. CFD technique is utilized for getting the solutions of both developing flow and developed flow regimes. Variations of temperature, velocity and pressure fields have been represented under different values of flow parameters. The overall CFD sim...
    Disponible

    59,14 €

  • ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING OPTIMIZATION TECHNIQUES
    Dr.TALLAPUREDDY SUBBA REDDY
    This book is the thesis of my PhD work which consists of analysis of shell and tube heat exchangers with different optimization techniques.This book is used a reference to scholars for their research work for comparison of results like heat transfer rate, enhancement factor, output temperature etc. This book consists of comparison of results with a real power plant data and the...
    Disponible

    93,55 €

  • Introduction to Mechanical Engineering (II)
    Lei WEI / Song CHEN / Zhijun Sun
    This book introduces some basic knowledge and methods of analyzing and solving problems involved in the field of mechanical engineering. The book consists of 12 chapters, the main contents are: Problem solving ability training; Mechanical parts and machine tools; Structure and fluid mechanics; Materials and stresses; Heat and energy systems; Mechanical motion and mechanical des...
    Disponible

    110,67 €

  • Energy - Efficient Design for Inland Ships
    S M Rashidul Hasan
    Hydrodynamic improvement of a ship can be done in different ways; however, this study focuses on the hydrodynamic improvement of the design based on fuel consumption and CO2 emission. A set of ship design suggestions are proposed by analyzing 2247 different types of inland ships. Those ship design suggestions had been implemented on existing inland general cargo, an oil tanker,...
    Disponible

    114,12 €

  • Hybrid Simulation in Flexible Job Shop Sequencing Systems
    Renato Rodrigues
    This research studies one of the most complex and important problems in the area of sequencing: flexible job shop systems. There is a current demand for the robustness of the model, which must be effective against unexpected everyday problems that affect the efficiency of the initial sequence defined. In addition, stochastic time and multi-objective search must be considered. T...
    Disponible

    77,96 €

  • Research on Extraction of Vanadium from V-bearing Hot Metal
    Cong Luo / Yifan Xiong / Zhenyu Zhou
    Oxygen blow smelting in converter has the efficient ability of recovering vanadium from v-bearing hot metal, which makes it becomes the most wildly used method. However, vanadium extraction smelting process in converter requires not only maximum vanadium recovery to form v-enriched slag, but also to ensure reasonable high carbon content in semi-steel, which is the other product...
    Disponible

    94,84 €

  • FRICTION STIR WELDING OF DISSIMILAR MATERIALS
    Adarsha Kumar Kaladari / Ravindra ANDUKURI / Suryanarayana Murthy Battula
    The primary objective of this book is to make it available to students, researchers, and those who are working on case study projects. Friction stir welding (FSW) is a newer solid-state joining technology. This joining technique is low-energy, eco-friendly, and versatile. It is especially useful for joining high-strength aerospace aluminium alloys and other metallic alloys that...
    Disponible

    56,72 €

  • EXPERIMENTATION ON HAZ IN ROTATION ARC WELDING FOR MILD STEEL
    Manchala Madusudan Prasad / Vemu Vara Prasad / Vullur Sai Sowmya Sree
    In a rotational arc welding process, the concept of temperature distribution is essential in order to control the HAZ (heat-affected zone) dimensions and get the required bead size, quality and microstructure of heat affected zone. In present research work an analytical solution for moving heat source with Gaussian heat distribution of inside volume of semi-central conicoidal s...
    Disponible

    79,28 €


Primera 05 06 07 08 09 10 11 12 13 14 Última